Case studies

Contractors to:


Contact detail:

210 Frizington Rd
Frizington
Cumbria
CA26 3QU
UK
Tel: 44 (01946) 810867

These are only a very small selection of case studies, for demonstration purposes only. All cases are genuine but in line with our strict policy on non-disclosure we always never reveal the name of a customer. All the systems we develop are often unique to that particular contract because we find that most contracts are unique in one way or another. Our systems are always designed to work around your problems and the problems we find (not the same thing by any means) and by removing all the problems you have you will be a very happy customer of ours with a guaranteed workable, real life solution.

Read the case studies to see just how we solved some really difficult problems:

CASE STUDY 2

We were asked for a cleaning method for a decommissioned plastic moulding machine which had never been cleaned and had been in operation for around 20 years. The use of water was severely limited due to the oil bilges below the machine and the fact that it was on a working machine shop floor.

PROBLEM: plastic granules and dust had mixed with oils and greases over the years to form an almost insoluble and impenetrable coating over the machine. In addition, oil absorbing granules weren’t working and any previous attempts to remove soiling with a steamer or solvents had failed.

SOLUTION: we were able to clean the machine to perfection using the minimum of water but we knew just what detergents would work on this type of soiling and how they should be used. We left a very satisfied customer with a full cleaning schedule for all the rest of his machines when they were in turn brought down

But our knowledge and experience is far wider than the case studies would show:

There is no cleaning problem anywhere, we can’t solve and here’s the reason why:

All our solutions come from:

But our experience is far wider than the case studies would show